Tips before first use

Please fully charge the lock before first use.

By default, the lock can only be used with the administrator fingerprint.

Up to 10 fingerprints can be stored.

Every user finger must be added by the administrator in advance.

Bluetooth is not required – the lock works completely offline.

 

LED Status Indicator

Blue light: Ready for input / setting

Green light: Fingerprint successfully recognized

Red light: Fingerprint not recognized or operation failed

 

Set up Administrator Fingerprint

The first finger stored is the administrator.

Place finger on sensor, blue light illuminates.

Place finger on the same spot multiple times (approx. 10 times) until the light turns green. Green light stays on for 2 seconds. Then place the finger on the sensor one last time briefly and the fingerprint is successfully stored.


Add User Fingerprints

After unlocking, place and hold the administrator finger until the blue light flashes.

Place the administrator finger on the sensor again to confirm the process (red light illuminates briefly).

Place the new user finger on the sensor approx. 5–10 times until the green light illuminates.
Fingerprint is successfully stored.

 

Delete Fingerprints

After unlocking, place and hold the administrator finger until both the blue and red lights flash.

Place the administrator finger on the sensor again – red light illuminates.

All stored fingerprints are deleted.

 

Unlocking

Place finger centered on the sensor.

When the blue light is on, the lock is open.

If the red light is on, place your finger on the sensor again or use another stored finger.